RW Central

It now should work in RW Enhancer 2 but the RW Enhancer PRO fix is in the works. Should be ready next week. Thank you for your patience.

Sent you a private message in order to fix this issue.

Hello @mjhoward1970, do you have any firewall/anti-virus that could cause issues with azure servers communication ? 

@Alti, fix available in 0.7.19.0  

@Alti, feature available in 0.7.19.0  

La mise à jour 0.7.19.0 est disponible  

Cette mise à jour apporte le support du mode d'affichage fenêtré de Train Simulator ! Ainsi, ceux d'entre vous qui jouent en mode d'affichage fenêtré seront désormais en mesure d'interagir correctement avec le HUD. 

Cette mise à jour permet également de sauvegarder et restaurer la taille et la position de votre fenêtre principale RWE 2 lorsque vous fermez/démarrez le logiciel et ne maximise plus la fenêtre automatiquement au démarrage. 

Bon week-end à tous !  

CHANGELOG: 

Citer

- Added TS windowed display mode support
- Added RW Enhancer 2 window position/size restoration support when restarting the software
- Improved display window management system
- Fixed forced 'Bloom' and 'Procedural Flora' TS settings even when using legacy TS shaders
- Fixed window size and position not being correctly restored when ending a service

Update 0.7.19.0 is available  

This update brings the Train Simulator windowed display mode support ! So those of you playing in windowed display mode will be able now to properly interact with the HUD. 

This update also save and restore your RWE 2 main window size and position when you close/start the software and no longer maximize the window automatically when started. 

Have a good week-end everyone !  

CHANGELOG:

Citer

- Added TS windowed display mode support
- Added RW Enhancer 2 window position/size restoration support when restarting the software
- Improved display window management system
- Fixed forced 'Bloom' and 'Procedural Flora' TS settings even when using legacy TS shaders
- Fixed window size and position not being correctly restored when ending a service

This was already being done  Will be ready in next update  

Hello @Alti, currently working on windowed display mode support  Should be ready this evening or tomorrow  

@Reef Saw your request about this on UkTrainSim  (I try to look for feedback everywhere). This is a nice idea but I think i will make a separated HUD widget for this. No promises for the release date because i want to make something that reflect the real signs appearance according to countries (UK, Germany, France...) but I think i might be able to integrate this soon. 

So after this feature is ready you will be able to disable the speedometer and have the "current" line speed HUD element displayed.

Hello @Reef, can you find it in the "Wagons" section by any chance ? 

If not, it could be a cooking issue with this content. I have seen quite a bit of loading errors with AP rolling stock. Basically when the .bin files are decompiled to XML they contain some syntax errors. Train Simulator is loading the data anyway but RW Enhancer 2 cooking system is is much more careful than TS when reading blueprint data. If there is any syntax error in the decompiled XML file, RWE 2 will not load it's data. 

Issue fixed in 0.7.18. Now RWE 2 audio engine is able to select the correct audio device appropriately. 

Hello @illige, 

Do the latest version give you more performances ? 

Regards

La mise à jour 0.7.18.0 est maintenant disponible  

Cette mise à jour modifie le comportement de l'accéléromètre. Il monte maintenant pour l'accélération et descend pour la décélération.

Des corrections et des améliorations ont également été apportées à la façon dont RW Enhancer 2 traite les conditions d'échec des tâches "Pickup Passengers". Il est maintenant plus "indulgent" et correspond mieux aux règles de TS. Un problème a également été corrigé : vous étiez obligé d'échouer une tâche d'arret passager si votre train était plus long que la longueur du quai de la gare. 

RW Enhancer 2 prend forme au fur et à mesure des mises à jour, grâce à vos commentaires et à votre soutien  

CHANGELOG: 

Citer

- Changed speedometer accelerometer behaviour. Now going up for acceleration and down for deceleration.
- Improved station stop train position detection. You can now open the passengers doors if at least 1/4 of your total consist length is still at the platform level
- Improved station stop failed detection system to better match TS rules
- Improved train reverser state detection system for some rolling stock 
- Slighly reduced 'driver chair squeak' sound layer triggering rate
- Fixed audio engine automatic output device selection 
- Fixed 'Pickup Passengers' tasks being failed with consists that are longer than the station platform total length

Update 0.7.18.0 is now available  

This update changes the behavior of speedometer accelerometer. Now going up for acceleration and down for deceleration.

Some fixes and improvement has also been made to how RW Enhancer 2 handle "Pickup Passengers" tasks fail conditions. Now it is more "forgiving" and better match TS rules. An issue has also been fixed were you were forced to fail a pickup passengers task if you train was longer than the station platform length. 

RW Enhancer 2 is shaping up nicely as updated are made, thanks to your feedback and support  

CHANGELOG: 

Citer

- Changed speedometer accelerometer behaviour. Now going up for acceleration and down for deceleration.
- Improved station stop train position detection. You can now open the passengers doors if at least 1/4 of your total consist length is still at the platform level
- Improved station stop failed detection system to better match TS rules
- Improved train reverser state detection system for some rolling stock 
- Slighly reduced 'driver chair squeak' sound layer triggering rate
- Fixed audio engine automatic output device selection 
- Fixed 'Pickup Passengers' tasks being failed with consists that are longer than the station platform total length

@Alti This is a nice suggestion and may make more sense and less confusing for some users. This has just been implemented and will be available in next update  

Hello, 

Be aware that RW Enhancer 2 is displaying the flyby direct distance (like TSW 2) and not the track distance like TS so it is normal to have a difference between TS and RWE 2 in terms of distance.

But in your case the difference seems to be quite huge. Is this route really "curved" ? 

@Alti We have sent you a private message about this issue.

Nice to see you here @mjhoward1970  Your Youtube videos are great and really helps to see potential issues and things to improve on our side. Feel free to create a single topic here on RW Central to post your videos if you want to promote your channel. 

Hello Andrey, 

RW Enhancer 2 only support 64 bits system and Train Simulator 64 bits. Do you have any reason to use Train Simulator 32 bits edition ? 

Regards

Hello @mjhoward1970, this is planned in a later update  

RW Enhancer 2 audio engine should select the default used windows audio device automatically. This is strange.

However, the ability to select a custom audio device in RW Enhancer 2 settings menu is on the roadmap (https://wiki.rwenhancer.com/doku.php?id=core:roadmap)

So it will come very soon  

Didn't saw you video at first read, i have seen it now. Maybe this is not related to the issue that just been fixed. 

Please give your feedback when you will have checked if your issue is fixed or not. Thanks  

La mise à jour 0.7.17.0 est disponible. Cette mise à jour améliore la compatibilité du matériel roulant avec RW Enhancer 2 et corrige un problème de détection de direction introduit par la dernière mise à jour. 

CHANGELOG:

Citer

- Improved driven engine detection system
- Improved rolling stock compatibility
- Fixed broken train movement direction detection 
- Fixed 'reversed track monitor display' issue introduced by last update

@Alti 0.7.17.0 update is now available and should fix this issue.